As the name suggests, a comfort fit ring is designed to maximize comfort for the wearer. In particular, a comfort fit ring can allow the wearer to more easily put on and remove the ring without catching on skin and knuckles. This has to do with the interior shape of the band.
Comfort Fit Ring vs. Standard
For a standard fit ring, the interior of the ring is flat. Meanwhile, for a comfort fit ring, the interior of the ring is convex. Comparatively, less of the ring’s material comes into contact with the finger, and the ring is able to more easily slide along the skin.
Comfort fit rings were developed as an alternative to standard fit rings. In the 1930s the price of precious metals rose, prompting widespread production of thin rings that used less material. Unfortunately, these thinner rings were much less comfortable, and therefore the idea of a comfort fit ring was developed to increase the comfort of the interior with minimal added material.
Knife Edge Ring vs. Comfort Fit
While comfort fit has to do with the shape of the interior of the ring, the knife edge has to do with the outer shape of the ring. A knife-edge ring features a raised edge at the center of the outer surface of the ring. This style can give the ring a distinctively sleek, contemporary look, and also can create an optical illusion that the ring is thinner than it actually is.
A knife edge is also an effective way to emphasize any stones or adornments on the ring, which may look bigger in contrast to the sharp edge. Ideally, these rings should be made of highly durable materials such as platinum.
Benefits of Comfort Fit
The following are some of the most important benefits of a comfort fit ring:
- More comfortable on your finger;
- Easier to slide on and off of the finger;
- Easier to use for people with large knuckles;
- Less likely to trap water under the band;
- Less skin contact with the band;
- Creates a snugger fit.
Drawbacks of Comfort Fit
The most notable drawback of comfort fit rings is the fact that they are typically more expensive than standard fit rings. However, this drawback can be mitigated by carefully shopping and comparing prices.
Comfort Fit Ring Sizing
Comfort ring sizing is slightly different compared to standard sizing. Comfort fit rings typically run big compared to standard rings. As such, it is recommended that you order a smaller size in comfort fit rings compared to your standard size. Specifically, you typically will want to choose a half-size smaller. For example, if you wear an 8 in a standard fit, you will likely need a 7.5 in a comfort fit.
Best Applications for Comfort Rings
Comfort fit rings are a great option under many different circumstances. However, it can be particularly useful under particular conditions. Notably, this type of ring can be extremely useful for people with rough skin, large hands, or large knuckles. It can also be a great option for people with sensitive skin. Finally, comfort rings can be valuable to people who intend to wear their rings often. As such, engagement and wedding rings are great candidates for comfort fit.
Is a Comfort Fit Ring Worth It?
As mentioned, comfort rings are typically more expensive than standard fit rings, due to the additional materials and artisanship needed to create them. Before purchasing a comfort fit ring, you should weigh the value of comfort fit against the additional cost. As mentioned, comfort fit rings are particularly valuable to people with large knuckles or sensitive skin. However, they are also often highly useful for people who are not as accustomed to wearing rings.
For example, if between a pair of spouses-to-be, one is very used to wearing rings, and the other is not, the former may not be bothered by a standard fit and may benefit from the cost savings of choosing a standard engagement and wedding ring. These cost savings may be particularly significant if you choose more affordable materials such as carbide. Meanwhile, the other may benefit significantly from a comfort fit to comfortably acclimate to wearing a ring frequently.
Other Ways To Minimize Ring Discomfort on Finger
Getting a comfort fit ring is not the only way to minimize or reduce pain or discomfort related to wearing a ring. There are many other steps you can take to make the experience more comfortable, including:
- Identifying and treating any underlying conditions that may cause pain or discomfort, such as arthritis or eczema;
- Ensuring that your ring is properly sized, with consideration for factors that may cause a change in ring size;
- Ensuring that you properly clean, dry, and moisturize the area underneath your ring;
- Allowing wounds or other injuries in the area to properly heal before continuing to wear your ring;
- Having the ring inspected for any imperfections such as scratches or twisted metal that may irritate or injure your finger;
- Conducting proper maintenance to prevent damage to the ring;
- Removing your ring temporarily when engaging in activities that may cause the ring to jostle or rub, such as playing an instrument or using power tools.
It is advisable to consider a variety of factors when choosing your ring and the care you take in wearing it, such as your skin type and how frequently you intend to wear it.